GWash has been specifically formulated to work in harmony with Gtechniq's range of coatings.
GWash produces a high foam content which breaks the bond between the dirt film and your vehicle's paintwork and lubricates dirt particles minimizing surface abrasion. Used in conjunction with Gtechniq coatings, GWash will ensure maximum gloss retention through reduced micro scratching during the wash process.
Produces high foam content
Can be diluted as much as 1:1,800
Prior to washing, remove loose dirt and contaminants from your vehicle by rinsing with a hose or jet wash
For light dirt use 2 caps of GWash per bucket, and 4 caps for heavier soiling
Always begin washing the upper surfaces and work your way down, rinsing your Gtechniq WM2 Microfibre Wash Mitt in a separate bucket of water as you go to release dirt and then replenish your mitt in a second bucket containing your dilution of water and GWash
Brake dust is highly abrasive so ideally use another mitt for cleaning your wheels
Ensure that you never press hard to remove dirt - for stubborn dirt, allow to soak for several minutes - and always rinse your car thoroughly to remove all soap residues
Never apply detergents directly to the bodywork of a car or to a sponge
Yellow Turbo Squeegee Blade is the original formulation. Squeegee is usually cut to shorter 4-5" lengths before use. Used for removal of application solution during the installation process. Great for...
3M™ Automotive Refinish Masking Tape is a yellow crepe-paper tape designed specifically for the critical paint masking processes used in the collision repair industry. It features a rubber-based adhesive and...